--- title: "Half-duplex setting" slug: "half-duplex-setting" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:41:06Z published: 2026-10-05T15:41:06Z canonical: "docs.trellix.com/half-duplex-setting" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Half-duplex setting When operating with a duplex setting of half-duplex, some data link errors, such as FCS, alignment, runts, and collisions are normal. Generally, a one percent ratio of errors to total traffic is acceptable for half-duplex connections. If the ratio of errors to input packets is greater than two or three percent, performance degradation may be noticeable. In half-duplex environments, it is possible for both the switch and the connected device to sense the wire and transmit exactly at the same time, resulting in a collision. Collisions can cause runts, FCS, and alignment errors, which are caused when the frame is not completely copied to the wire, resulting in fragmented frames.