--- title: "Health check of a Sensor" slug: "health-check-of-a-sensor-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:31:15Z published: 2026-11-19T12:31:15Z canonical: "docs.trellix.com/health-check-of-a-sensor-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Health check of a Sensor To see if your Sensor is functioning correctly, do one of the following: On the Sensor: - At the command prompt, type `status`. This displays system status (such as Operational Status, system initialization, signature version, trust, channel status, alert counts, and so on). Sensor should be initialized and in good health. - At the command prompt, type `show`. This displays configuration information (such as Sensor image version, type, name, Manager and Sensor IP addresses, and so on). On the Manager: - In the Manager **Dashboard** page, view the **System Faults** monitor. Manager status should be **UP**, and Sensor status should be **ACTIVE**. > [!NOTE] > Note > > If you see system faults indicating that the Manager is down, check the **Faults** tab in **Logs** page to interpret the fault and, if necessary, take action to clear the fault.