---
title: "Health check of a Sensor"
slug: "health-check-of-a-sensor"
tags: ["Product Usage", "IPS 10.1.10"]
updated: 2026-09-06T12:33:43Z
published: 2026-10-05T15:41:20Z
canonical: "docs.trellix.com/health-check-of-a-sensor"
---
> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.
# Health check of a Sensor
To see if your Sensor is functioning correctly, do one of the following:
On the Sensor:
- At the command prompt, type
status. This displays system status (such as Operational Status, system initialization, signature version, trust, channel status, alert counts, and so on). Sensor should be initialized and in good health.
- At the command prompt, type
show. This displays configuration information (such as Sensor image version, type, name, Manager and Sensor IP addresses, and so on).
On the Manager:
- In the Manager
**Dashboard** page, view the
**System Faults** monitor. Manager status should be
**UP**, and Sensor status should be
**ACTIVE**.
> [!NOTE]
> Note
>
> If you see system faults indicating that the Manager is down, check the **Faults** tab in **Logs** page to interpret the fault and, if necessary, take action to clear the fault.