Note that this command is used to add an IP address for a second NIC in one Manager server; this is not a command to use to set up a Manager Disaster Recovery peer—or Secondary—Manager.
To add a secondary Manager IP,
On the Sensor, type set manager secondary ip <A.B.C.D.>
Specify a 32-bit address written as four eight-bit numbers separated by periods, where A,B,C or D represents an eight-bit number between 0-255.
For example, set manager secondary ip 192.168.3.19
Or
Type set manager secondary ip <A:B:C:D:E:F:G:H>
where <A:B:C:D:E:F:G:H> is a 128-bit address written as octet (eight groups) of four hexadecimal numbers, separated by colons. Each group ( A,B,C,D etc.) is a group of hexadecimal numbers between 0000-FFFF.
For example: set manager secondary ip 2001:0db8:8a2e:0000:0000:0000:0000:0111
If one or more four-digit group(s) is 0000, the zeros may be omitted and replaced with two colons (::).
For example, set manager secondary ip 2001:0db8:8a2e::0111