--- title: "How to add a secondary Manager IP" slug: "how-to-add-a-secondary-manager-ip-2" tags: ["Install and Get Started", "IPS 11.1.x"] updated: 2026-11-19T12:53:55Z published: 2026-11-19T12:53:55Z canonical: "docs.trellix.com/how-to-add-a-secondary-manager-ip-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # How to add a secondary Manager IP Note that this command is used to add an IP address for a second NIC in one Manager server; this is not a command to use to set up a Manager Disaster Recovery peer—or *Secondary*—Manager. To add a secondary Manager IP, On the Sensor, type `set manager secondary ip <A.B.C.D.>` Specify a 32-bit address written as four eight-bit numbers separated by periods, where `A,B,C or D` represents an eight-bit number between 0-255. For example, `set manager secondary ip 192.168.3.19` Or Type `set manager secondary ip <A:B:C:D:E:F:G:H>` where `<A:B:C:D:E:F:G:H>` is a 128-bit address written as octet (eight groups) of four hexadecimal numbers, separated by colons. Each group ( `A,B,C,D etc.`) is a group of hexadecimal numbers between 0000-FFFF. For example: `set manager secondary ip 2001:0db8:8a2e:0000:0000:0000:0000:0111` If one or more four-digit group(s) is 0000, the zeros may be omitted and replaced with two colons (::). For example, `set manager secondary ip 2001:0db8:8a2e::0111`