--- title: "How to connect the gigabit ethernet monitoring ports" slug: "how-to-connect-the-gigabit-ethernet-monitoring-ports-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:26:19Z published: 2026-11-19T12:26:19Z canonical: "docs.trellix.com/how-to-connect-the-gigabit-ethernet-monitoring-ports-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # How to connect the gigabit ethernet monitoring ports Inline Fail Open - (Active or Passive) mode for Gigabit Ethernet (GE) ports requires the use of the external Gigabit fail-open Kit. The Passive Fail Open kit requires a RJ-45 control cable connecting to X1, for example, RJ-11 on NS7500. > [!NOTE] > Note > > Fail-closed mode for GE ports requires no extra hardware; simply connect your fiber cables to the GE port pair (For example: G0/1-G0/2). For information on how to connect the Sensor with a Gigabit Fail-Open Kit, see the documentation that accompanies the kit. For example, the Active-Fiber (850 nm) 10G (62.5 μm) Bypass Kit includes Trellix IPS 1/10 Gigabit Modular Active Fail-Open Bypass Kit Guide.