Before installation, ensure that you complete the following tasks:
The Windows server, on which the Manager software will be installed, should be configured and ready to be placed online (Not required for Linux based Manager).
You must have administrator privileges for the Windows based Manager server (Not required for Linux based Manager).
This Windows server should be dedicated, hardened for security, and placed on its own subnet. This server should not be used for programs like instant messaging or other non-secure Internet functions (Not required for Linux based Manager).
Make sure your hardware requirements meet at least the minimum requirements.
Ensure the proper static IP address has been assigned to the Manager server. For the Manager server, Trellix strongly recommends assigning a static IP using DHCP for IP assignment.
If applicable, configure name resolution for the Manager.
Ensure that all parties have agreed to the solution design, including the location and mode of all Trellix IPS Sensors, the use of sub-interfaces or interface groups, and if and how the Manager will be connected to the production network.
Obtain the required Trellix IPS Registration key, license file, and grant number.
Accumulate the required number of wires and (supported) SFP, SFP+, QSFP+, or QSFP28 transceivers. Ensure these are approved hardware from Trellix or a supported vendor.
If applicable, identify the ports to be mirrored, and someone who has the knowledge and rights to mirror them.
Allocate the proper static IP addresses for the Sensor. For the Sensors, you cannot assign IPs using DHCP.
Identify hosts that may cause false positives, for example, HTTP cache servers, DNS servers, mail relays, SNMP managers, and vulnerability scanners.