--- title: "How to plan for installation" slug: "how-to-plan-for-installation-2" tags: ["Install and Get Started", "IPS 11.1.x"] updated: 2026-11-19T12:54:06Z published: 2026-11-19T12:54:06Z canonical: "docs.trellix.com/how-to-plan-for-installation-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # How to plan for installation Before installation, ensure that you complete the following tasks: - The Windows server, on which the Manager software will be installed, should be configured and ready to be placed online (Not required for Linux based Manager). - You must have administrator privileges for the Windows based Manager server (Not required for Linux based Manager). - This Windows server should be dedicated, hardened for security, and placed on its own subnet. This server should not be used for programs like instant messaging or other non-secure Internet functions (Not required for Linux based Manager). - Make sure your hardware requirements meet at least the minimum requirements. - Ensure the proper static IP address has been assigned to the Manager server. For the Manager server, Trellix strongly recommends assigning a static IP using DHCP for IP assignment. - If applicable, configure name resolution for the Manager. - Ensure that all parties have agreed to the solution design, including the location and mode of all Trellix IPS Sensors, the use of sub-interfaces or interface groups, and if and how the Manager will be connected to the production network. - Obtain the required Trellix IPS Registration key, license file, and grant number. - Accumulate the required number of wires and (supported) SFP, SFP+, QSFP+, or QSFP28 transceivers. Ensure these are approved hardware from Trellix or a supported vendor. - If applicable, identify the ports to be mirrored, and someone who has the knowledge and rights to mirror them. - Allocate the proper static IP addresses for the Sensor. For the Sensors, you cannot assign IPs using DHCP. - Identify hosts that may cause false positives, for example, HTTP cache servers, DNS servers, mail relays, SNMP managers, and vulnerability scanners.