--- title: "How to plan for installation" slug: "how-to-plan-for-installation" tags: ["Install and Get Started", "IPS 10.1.10"] updated: 2026-09-23T09:37:28Z published: 2026-09-23T09:37:28Z canonical: "docs.trellix.com/how-to-plan-for-installation" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # How to plan for installation Before installation, ensure that you complete the following tasks: - The Windows server, on which the Manager software will be installed, should be configured and ready to be placed online (Not required for Linux based Manager). - You must have administrator privileges for the Windows based Manager server (Not required for Linux based Manager). - This Windows server should be dedicated, hardened for security, and placed on its own subnet. This server should not be used for programs like instant messaging or other non-secure Internet functions (Not required for Linux based Manager). - Make sure your hardware requirements meet at least the minimum requirements. - Ensure the proper static IP address has been assigned to the Manager server. For the Manager server, Trellix strongly recommends assigning a static IP using DHCP for IP assignment. - If applicable, configure name resolution for the Manager. - Ensure that all parties have agreed to the solution design, including the location and mode of all Trellix IPS Sensors, the use of sub-interfaces or interface groups, and if and how the Manager will be connected to the production network. - Obtain the required Trellix IPS Registration key, license file, and grant number. - Accumulate the required number of wires and (supported) GBICs, SFPs, or XFPs. Ensure these are approved hardware from Trellix or a supported vendor. Ensure that the required number of Trellix IPS dongles, which ship with the Sensors, are available. - Crossover cables will be required for 10/100 or 10/100/1000 monitoring ports if they are directly connected to a firewall, router, or end node. Otherwise, standard patch cables are required for the Fast Ethernet ports. - If applicable, identify the ports to be mirrored, and someone who has the knowledge and rights to mirror them. - Allocate the proper static IP addresses for the Sensor. For the Sensors, you cannot assign IPs using DHCP. - Identify hosts that may cause false positives, for example, HTTP cache servers, DNS servers, mail relays, SNMP managers, and vulnerability scanners.