--- title: "How to use peer ports" slug: "how-to-use-peer-ports-2" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T09:43:52Z published: 2026-09-17T09:43:52Z canonical: "docs.trellix.com/how-to-use-peer-ports-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # How to use peer ports You must use two peer monitoring ports of the Sensor to deploy it in full duplex mode. The Sensor's numbered ports are internally wired in pairs to accommodate the traffic. The following ethernet ports are coupled and must be used together. | Port Pairs | Sensor | | --- | --- | | 1 and 2 | NS3200/NS3100 | | 3 and 4 | NS3200/NS3100 | | 5 and 6 | NS3200/NS3100 | | 7 and 8 | NS3200/NS3100 | > [!NOTE] > Note > > Since monitoring ports are internally wired, when you disable one of the ports in a pair, the corresponding port is also disabled.