--- title: "How to use peer ports" slug: "how-to-use-peer-ports-8" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T09:43:52Z published: 2026-09-17T09:43:52Z canonical: "docs.trellix.com/how-to-use-peer-ports-8" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # How to use peer ports You must use two peer monitoring ports of the Sensor to deploy it full-duplex mode. On the Sensor, the numbered ports are internally wired in pairs to accommodate the traffic. > [!NOTE] > Note > > - On NS5100 and NS5200 Sensors, G0, G1, and G2 indicate fixed port slots. > - Since monitoring ports are internally wired, when you disable one of the ports in a pair, the corresponding port is also disabled. The following ethernet ports are coupled and must be used together. | Port Pairs | Sensor | | --- | --- | | G0/1 and G0/2 | NS5200/NS5100 | | G1/1 and G1/2 | NS5200/NS5100 | | G1/3 and G1/4 | NS5200/NS5100 | | G1/5 and G1/6 | NS5200/NS5100 | | G1/7 and G1/8 | NS5200/NS5100 | | G1/9 and G1/10 | NS5200/NS5100 | | G1/11 and G1/12 | NS5200/NS5100 | | G2/1 and G2/2 | NS5200/NS5100 | | G2/3 and G2/4 | NS5200/NS5100 | | G2/5 and G2/6 | NS5200/NS5100 | | G2/7 and G2/8 | NS5200/NS5100 |