--- title: "hx agent max-cpu" slug: "hx-agent-max-cpu" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:57Z published: 2026-08-04T17:21:57Z canonical: "docs.trellix.com/hx-agent-max-cpu" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # hx agent max-cpu Sets the general maximum CPU percentage used for agent processing. This setting applies to all hosts. Exceptions to this setting are specified using the **hx agent resource-exception max-cpu** command. ### Syntax `[no] hx agent max-cpu <nnn>` ### Parameters `no` Resets the maximum percentage of CPU used for agent processing to its default. `max-cpu <nnn>` Specify the maximum percentage of CPU used for agent processing. Valid values are integers ranging from 10 through 100 (percent). The default is 100. ### Example The following example sets the maximum amount of CPU used for agent processing to 50 percent. ``` hostname (config) # hx agent max-cpu 50 ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Endpoint Security (HX)**: Release 3.0