--- title: "hx ecosystem dmz attach" slug: "hx-ecosystem-dmz-attach" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:57Z published: 2026-08-04T17:21:57Z canonical: "docs.trellix.com/hx-ecosystem-dmz-attach" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # hx ecosystem dmz attach Attaches an HXD (DMZ) appliance to the Endpoint Security (HX) appliance. Enter this command on the Endpoint Security (HX) appliance. ### Syntax `[no] hx ecosystem dmz attach <hostname/IP of DMZ> [passphrase <passphrase>]` ### Parameters `no` Detaches an HXD appliance from the Endpoint Security (HX) appliance. If you are using the `no` form of this command, a passphrase is not necessary. `attach <hostname/IP of DMZ>` Specify the IP address or hostname of the HXD appliance. `passphrase <passphrase>` Specify the passphrase for the HXD appliance. This passphrase was generated on the HXD appliance when you ran the **hx ecosystem dmz attach-initiate** command. If you are using the `no` form of this command, a passphrase is not necessary. ### Example The following example attaches HXD appliance with the IP address `12.34.567.89` to the Endpoint Security (HX) appliance. The passphrase for the HXD appliance in this example is `password123`: ``` hostname (config) # hx ecosystem dmz attach 12.34.567.89 passphrase password123 ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Endpoint Security (HX)**: Release 2.5