--- title: "hx ecosystem dmz provisioning-enabled" slug: "hx-ecosystem-dmz-provisioning-enabled" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:57Z published: 2026-08-04T17:21:57Z canonical: "docs.trellix.com/hx-ecosystem-dmz-provisioning-enabled" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # hx ecosystem dmz provisioning-enabled Enables or disables an HXD (DMZ) appliance to provision a Trellix Endpoint Security Agent (HX). After you enable provisioning for the HXD appliance using this command, use the **hx agent server provisioning primary** command to activate provisioning by the appliance. To enable an HX (non-DMZ) appliance to provision a Trellix Endpoint Security Agent (HX), use the **hx agent server provisioning enable** command. ### Syntax `[no] hx ecosystem dmz <hostname> provisioning-enabled` ### Parameters `no` Disables provisioning by this HXD appliance. `dmz <hostname>` Specify the hostname or IP address of the HXD (DMZ) appliance. ### Example The HXD appliance identified by IP address `12.34.567.89` is a provisioning server for agents after the following command is run: ``` hostname (config) # hx ecosystem dmz 12.34.567.89 provisioning-enabled ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Endpoint Security (HX):** Release 2.6