--- title: "hx rproxy relay" slug: "hx-rproxy-relay" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:57Z published: 2026-08-04T17:21:57Z canonical: "docs.trellix.com/hx-rproxy-relay" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # hx rproxy relay Allows you to configure an HX or HXD appliance as a TCP relay to another HX or HXD appliance. All agent traffic to the original appliance is forwarded to the target appliance after this command is run. ### Syntax `[no] hx rproxy relay <target hostname or IP address>` ### Parameters `no` Disables the TCP relay to the target appliance. Agent traffic from the original appliance is no longer forwarded to the target appliance when the `no` form of this command is run. `<hostname or target IP address>` Specify the hostname or IP address of the target appliance. All agent traffic from the original appliance is forwarded to this target appliance after this command is run. ### Example The following example forwards all agent traffic from the current appliance (the original appliance) to the target appliance with the IP address 12.34.567.89: `hostname (config) # hx rproxy relay 12.34.567.89` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Endpoint Security (HX):** Release 3.6