Specifies the timeout period for an Endpoint Security (HX) acquisition extraction. When the acquisition extraction attempt exceeds this time, the extraction fails.
Syntax
[no] hx server acquisition extraction timeout <seconds>
Parameters
no
Resets the acquisition extraction timeout to the default of 5400 seconds (1.5 hours).
timeout <seconds>
Specify the number of seconds for the timeout period for acquisition extractions. Valid values range from 0 to 86400 seconds (24 hours). The default is 5400 seconds (1.5 hours). Specifying 0 seconds disables the timeout period (no extraction timeout period is enforced).
Examples
The following example sets the Endpoint Security (HX) acquisition extraction timeout period to 60 minutes (3600 seconds):
hostname (config) # hx server acquisition extraction timeout 3600
The following example sets the Endpoint Security (HX) acquisition extraction timeout period to the default of 1.5 hours (5400 seconds):
hostname (config) # no hx server acquisition extraction timeout
User role
Admin
Command mode
Config
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Endpoint Security (HX): Release 3.2