--- title: "hx server acquisition extraction timeout" slug: "hx-server-acquisition-extraction-timeout" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:57Z published: 2026-08-04T17:21:57Z canonical: "docs.trellix.com/hx-server-acquisition-extraction-timeout" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # hx server acquisition extraction timeout Specifies the timeout period for an Endpoint Security (HX) acquisition extraction. When the acquisition extraction attempt exceeds this time, the extraction fails. ### Syntax `[no] hx server acquisition extraction timeout <seconds>` ### Parameters `no` Resets the acquisition extraction timeout to the default of 5400 seconds (1.5 hours). `timeout <seconds>` Specify the number of seconds for the timeout period for acquisition extractions. Valid values range from 0 to 86400 seconds (24 hours). The default is 5400 seconds (1.5 hours). Specifying 0 seconds disables the timeout period (no extraction timeout period is enforced). ### Examples The following example sets the Endpoint Security (HX) acquisition extraction timeout period to 60 minutes (3600 seconds): `hostname (config) # hx server acquisition extraction timeout 3600` The following example sets the Endpoint Security (HX) acquisition extraction timeout period to the default of 1.5 hours (5400 seconds): `hostname (config) # no hx server acquisition extraction timeout` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Endpoint Security (HX):** Release 3.2