--- title: "icap-service block-mode enable" slug: "icap-service-block-mode-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:54Z published: 2026-08-04T17:22:54Z canonical: "docs.trellix.com/icap-service-block-mode-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # icap-service block-mode enable Enables or disables Internet Content Adaptation Protocol (ICAP) service blocking mode on the Network Security appliance. The ICAP service blocking mode is disabled by default. > [!NOTE] > Note > > Enabling ICAP service does not automatically enable ICAP blocking mode. When ICAP service blocking mode is enabled, detection of a potential threat in a REQMOD or RESPMOD request from an ICAP client causes the Network Security appliance―acting as an ICAP server―to block the requested data. If the ICAP service blocking mode comfort page is enabled, the appliance serves the client browser a static HTTP comfort page. For details, see “Configuring Threat Management” in the Network Security User Guide. ### Syntax `[no] icap-service block-mode enable` ### Parameters `no` Disables ICAP service blocking mode. ### Examples The following example enables the ICAP service blocking mode. ``` hostname (config) # icap-service block-mode enable ``` The following example disables the ICAP service blocking mode. ``` hostname (config) # no icap-service block-mode enable ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 9.0