--- title: "icap-service block-mode response-page enable" slug: "icap-service-block-mode-response-page-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:54Z published: 2026-08-04T17:22:54Z canonical: "docs.trellix.com/icap-service-block-mode-response-page-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # icap-service block-mode response-page enable Enables or disables the Internet Content Adaptation Protocol (ICAP) service blocking mode comfort page on the Network Security appliance. The comfort page is enabled by default. When the ICAP service, blocking mode, and blocking mode comfort page are enabled, if the Network Security appliance―acting as an ICAP server―blocks a REQMOD or RESPMOD request, the ICAP client browser is served a static HTTP comfort page. For details, see the "Configuring Threat Management" chapter of the Network Security User Guide. ### Syntax `[no] icap-service block-mode response-page enable` ### Parameters `no` Disables the ICAP service blocking mode comfort page. ### Examples The following example enables the ICAP service blocking mode comfort page. `hostname (config) # icap-service block-mode response-page enable` The following example disables the ICAP service blocking mode comfort page. `hostname (config) # no icap-service block-mode response-page enable` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 9.0