--- title: "icap-service enable" slug: "icap-service-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:54Z published: 2026-08-04T17:22:54Z canonical: "docs.trellix.com/icap-service-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # icap-service enable Enables or disables the Internet Content Adaptation Protocol (ICAP) service on the Network Security appliance. When the ICAP service is enabled, the Network Security appliance can act as an ICAP server to perform signature and callback detection and malware analysis on ICAP-encapsulated data from a proxy server running an ICAP client. When the ICAP service is disabled, the Network Security appliance cannot act as an ICAP server. > [!NOTE] > Note > > The ICAP service is disabled by default. For details about the ICAP service, see the "Configuring Threat Management" chapter of the Network Security User Guide. ### Syntax `[no] icap-service enable` ### Parameters `no` Disables the appliance from performing the role of an ICAP server to perform malware analysis on ICAP-encapsulated data. ### Examples The following example enables the ICAP service. ``` hostname (config) # icap-service enable ``` The following example disables the ICAP service. ``` hostname (config) # no icap-service enable ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.3