--- title: "icap-service max-connections" slug: "icap-service-max-connections" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:54Z published: 2026-08-04T17:22:54Z canonical: "docs.trellix.com/icap-service-max-connections" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # icap-service max-connections Configures the maximum number of simultaneous connections allowed on the Network Security appliance acting as an Internet Content Adaptation Protocol (ICAP) server. The maximum number of connections that you can configure is specific to each appliance model. For details about how to configure the maximum number of ICAP connections, see the "Configuring Threat Management" chapter of the Network Security User Guide. ### Syntax `icap-service max-connections <number_of_connections>` ### Parameters `<number_of_connections>` The maximum number of ICAP connections can range from 25 to 500. By default, the maximum number of ICAP connections is 25. ### Example The following example sets the maximum number of simultaneous connections to 25. ``` hostname (config) # icap-service max-connections 25 ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.3