--- title: "icap-service reqmod enable" slug: "icap-service-reqmod-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:54Z published: 2026-08-04T17:22:54Z canonical: "docs.trellix.com/icap-service-reqmod-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # icap-service reqmod enable Enables or disables the request modification mode (REQMOD) for the Internet Content Adaptation Protocol (ICAP) service. When you enable REQMOD for the ICAP service on the Network Security appliance, a third-party device, acting as an ICAP client, can send an ICAP-encapsulated HTTP request to the Network Security appliance acting as an ICAP server. When you disable REQMOD for the ICAP service on the Network Security appliance, a 204 response code is sent to the ICAP client. > [!NOTE] > Note > > By default, the request modification mode is enabled for the ICAP service. For details about how to enable or disable the request modification mode for the ICAP service, see the "Configuring Threat Management" chapter of the Network Security User Guide. ### Syntax `[no] icap-service reqmod enable` ### Parameters `no` Disables REQMOD for the ICAP service on the appliance. ### Examples The following example enables REQMOD for the ICAP service on the appliance. ``` hostname (config) # icap-service reqmod enable ``` The following example disables REQMOD for the ICAP service on the appliance. ``` hostname (config) # no icap-service reqmod enable ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.3