--- title: "icap-service secure certificate" slug: "icap-service-secure-certificate" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:54Z published: 2026-08-04T17:22:54Z canonical: "docs.trellix.com/icap-service-secure-certificate" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # icap-service secure certificate Configures the SSL certificate that is submitted by the Internet Content Adaptation Protocol (ICAP) server to connect to ICAP clients over secure ICAP connections. The Network Security appliance acting as an ICAP server uses the default system-self-signed certificate to establish secure communication. If you want to use another certificate, you must import the server certificate and matching key on the Network Security appliance and specify the same certificate as part of the ICAP service settings. For details about how to import a server SSL certificate, refer to the Trellix System Security Guide. For details about how to configure the settings for the ICAP service, see the "Configuring Threat Management" chapter of the Network Security User Guide. ### Syntax `icap-service secure certificate <certificateName>` ### Parameters `<certificateName>` Name of the certificate. By default, the system-self-signed certificate is used to establish secure communication. ### Example The following example shows how to configure the default system-self-signed certificate. ``` hostname (config) # icap-service secure certificate system-self-signed ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.3