--- title: "icap-service secure port" slug: "icap-service-secure-port" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:54Z published: 2026-08-04T17:22:54Z canonical: "docs.trellix.com/icap-service-secure-port" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # icap-service secure port Establishes a secure Internet Content Adaptation Protocol (ICAP) connection between the Network Security appliance and the ICAP client on TCP port 11344 by default. For details about how to configure the settings for the ICAP service, see the "Configuring Threat Management" chapter of the Network Security User Guide. ### Syntax `icap-service secure port <port_number>` ### Parameters `<port_number>` The TCP port number that is used to establish a secure ICAP connection between the Network Security appliance and the ICAP client. By default, the secure ICAP connection is on port 11344. ### Example The following example establishes a secure ICAP connection between the Network Security appliance and the ICAP client on TCP port 11344. ``` hostname (config) # icap-service secure port 11344 ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.3