--- title: "icap-service tcp port" slug: "icap-service-tcp-port" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:54Z published: 2026-08-04T17:22:54Z canonical: "docs.trellix.com/icap-service-tcp-port" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # icap-service tcp port Allows the Network Security appliance to receive traffic sent over Internet Content Adaptation Protocol (ICAP) on either the ether1 or ether2 management interface on TCP port 1344 by default. For details about how to configure the settings for the ICAP service, see the "Configuring Threat Management" chapter of the Network Security User Guide. ### Syntax `icap-service tcp port <port_number>` ### Parameters `<port_number>` The TCP port number that is used for traffic sent over ICAP. By default, the ICAP server listens for traffic on port 1344. ### Example The following example allows the Network Security appliance to receive traffic sent over ICAP on TCP port 1344. ``` hostname (config) # icap-service tcp port 1344 ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Network Security:** Release 8.3