--- title: "image boot location" slug: "image-boot-location" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:54Z published: 2026-08-04T17:22:54Z canonical: "docs.trellix.com/image-boot-location" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # image boot location Use this command to specify which partition the system should boot from by default. The appliance includes two boot partitions (1 and 2). By default, the appliance will always boot from partition 1. > [!NOTE] > Note > > The `boot system location` command performs the same function as the `image boot location` command. ### Syntax `image boot location { 1 | 2 }` ### Parameters `1` Sets the default boot partition to 1. (default) `2` Sets the default boot partition to 2. ### Examples The following example sets the default boot partition to 1. (default) `hostname (config) # image boot location 1` The following example sets the default boot partition to 2. `hostname (config) # image boot location 2` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis:** Before Release 6.4 - **Central Management System:** Before Release 6.4 - **Email Security — Server:** Before Release 6.4 - **File Protect:** Before Release 6.4 - **Endpoint Security (HX):** Release 2.5 - **Network Security:** Before Release 6.4