--- title: "Import previously exported custom attacks" slug: "import-previously-exported-custom-attacks-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:13Z published: 2026-11-19T12:27:13Z canonical: "docs.trellix.com/import-previously-exported-custom-attacks-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Import previously exported custom attacks If you had exported any Trellix IPS Custom Attacks, you can import it back into the Manager. Note that this should be the same ZIP file that was created at the time of export. If this ZIP file contains any Snort Custom Attacks, those are imported as well. This feature enables you to import custom attack definitions created on a different Manager as well as the Trellix IPS-defined custom attacks. > [!NOTE] > Note > > When you import the ZIP file containing the exported attack definitions, only the attacks not present in the Manager are imported. To import the previously exported Trellix IPS Custom Attacks, perform the following steps: 1. In the Custom Attack Editor, go to **Other Actions** → **Import**. ![GUID-008C690B-9B7D-4F86-9032-BB749A28B766-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-f44e9100-84a2-faa3-0def-765602998b7e(8).png?sv=2026-02-06&spr=https&st=2026-11-20T14%3A12%3A39Z&se=2026-11-20T15%3A12%3A39Z&sr=c&sp=r&sig=3vf2Dd0uMIWPKH%2B6bvqW08KSgO8ZS1ngp1FvzCUysME%3D) 2. Browse to the location of your saved Trellix IPS Custom Attack ZIP file. 3. Click **Open**. The imported attacks are listed in a new tab in the Custom Attack Editor. If the ZIP contains Snort Custom Attacks, those two types of attacks are listed on separate tabs. 4. If you are importing Native Custom Attacks: If you are importing Snort Rules: 1. Select **Import Native Trellix IPS Attacks**. **Import Native Trellix IPS Attacks**![Import Native Trellix IPS Attacks](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0ee46046-45c7-58fb-0378-32a5ce79cfd5(8).png?sv=2026-02-06&spr=https&st=2026-11-20T14%3A12%3A39Z&se=2026-11-20T15%3A12%3A39Z&sr=c&sp=r&sig=3vf2Dd0uMIWPKH%2B6bvqW08KSgO8ZS1ngp1FvzCUysME%3D) 2. Deselect **Import Snort Rules**. 3. Deselect **Import Snort Macros**. 4. Deselect **Import Snort Classification**. 5. Click **Import**. 1. Deselect **Import Native Trellix IPS Attacks**. 2. Select **Import Snort Rules**. **Import Snort Rules**![Import Snort Rules](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-7ab692cc-ab75-7560-efaf-a324cb7bfb47(8).png?sv=2026-02-06&spr=https&st=2026-11-20T14%3A12%3A39Z&se=2026-11-20T15%3A12%3A39Z&sr=c&sp=r&sig=3vf2Dd0uMIWPKH%2B6bvqW08KSgO8ZS1ngp1FvzCUysME%3D) 3. Select **Check For Overlaps With Existing Trellix IPS Attacks**. 4. Select a **Protection Category** value. 5. Select **Import Snort Macros**. 6. Select **Import Snort Classification**. 7. Click **Import**. 5. Verify if the attack is published in the policies. 6. Publish the attack with its signatures to the Sensors for attack detection.