--- title: "Import software for offline devices" slug: "import-software-for-offline-devices" tags: ["Install and Get Started", "IPS 10.1.10"] updated: 2026-09-23T09:38:30Z published: 2026-09-23T09:38:30Z canonical: "docs.trellix.com/import-software-for-offline-devices" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Import software for offline devices To perform an offline download of the device software: ## Task 1. Set up the Manager and device. 2. Import the device image jar file on to the Manager from **Manual Import** tab, using **Manager** → **** → **Trellix IPS Protection Status**. 3. Go to **Devices** → **** → **Global** → **Device Manager**. The **Device Manager** page is displayed. 4. Select the **Sensors** tab. From the list, select the required Sensor. 5. Select **Export Sync File** from **Other Actions** drop-down. 6. Save the device image upgrade file to the location of your choice. 7. Copy the device configuration file to the TFTP server. 8. Connect to the device through CLI and configure the TFTP server IP. 9. Execute the loadconfiguration <image filepath in the tftp server><imagefile name> from the CLI. 10. Once the image file copied on to the device (it takes some time), check with downloadstatus command in the CLI to get the status. 11. Reboot the device on successful loading of the image.