--- title: "Importing a host key into the global host-keys database using the CLI" slug: "importing-a-host-key-into-the-global-host-keys-database-using-the-cli-3" tags: ["Central Management System", "Install and Get Started"] updated: 2026-10-01T09:24:30Z published: 2026-10-01T09:24:30Z canonical: "docs.trellix.com/importing-a-host-key-into-the-global-host-keys-database-using-the-cli-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Importing a host key into the global host-keys database using the CLI Use the commands in this section to import the host key or keys from one node of a Central Management System cluster into the global host-keys database of the other node, and then repeat the process on the other node. This procedure is required for global host-key authentication, in which the connection will be allowed only if the host key one node sends is already in the global host-keys database of the other node. You must import a host key for the default HA interface. Trellix recommends that you also import the host key for the backup HA interface, if one is configured. The host-key strings will be identical for each interface, except for the IP address. ### Caution If you choose to use global host-key authentication, you must explicitly enable it in addition to importing the host key. For details, see [Enabling strict and global host-key checking using the CLI](/network-and-platform/docs/enabling-strict-and-global-host-key-checking-using-the-cli-3). ### Note Before you perform this procedure, you must obtain the global host key from each node. For details, see [Obtaining a host key using the CLI](/network-and-platform/docs/obtaining-a-host-key-using-the-cli-3) and [Obtaining a host key for the primary node using the Web UI](/network-and-platform/docs/obtaining-a-host-key-for-the-primary-node-using-the-web-ui-1) . To import the global host key: 1. Log in to the CLI of one node. 2. Enable the CLI configuration mode: ```plaintext node-hostname > enable node-hostname # configure terminal ``` 3. Stop the cluster engine: ```plaintext node-hostname (config) # ha engine stop ``` 4. Import each key you obtained from the other node into the global host-keys database: ```plaintext node-hostname (config) # ssh client global known-host "" ``` ### Important The key must start with the IP address, and it must be enclosed in double quotation marks. 5. Verify your change: ```plaintext node-hostname (config) # show ssh client ``` 6. Save your change: ```plaintext node-hostname (config) # write memory ``` 7. Reboot the node: ```plaintext node-hostname (config) # reload ``` 8. Repeat these steps on the other node. ### Examples This example imports the host keys from node2 into the global host-key database of node1. In this example, the cluster is in a dual-interface deployment, so host keys are imported for the default HA interface and the backup HA interface. Relevant information is highlighted for illustration. ```plaintext node1 (config) # ha engine stop node1 (config) # ssh client global known-host "10.0.0.2 ssh-rsa AAAAB3NAfgbzY ulDSIxOKZTh2VBnKsy0qRWrCps64Itlh6iRlr7JxazaC1yc2EAAAADAQABAAABAQCzd5JwKtk5BjH Le/jxkF0JzWcXOTw9l0bz2SctkQrihkqg/zXqrmxtE6Z2f2oxUobcax+eqS6QMp5nnbPTDLJTbHCN njkawdDC6IhLk0BdncChpTS9E+ZF/F67YwpuIpgraWrchTCwfG+jAtTAGsygD0VVrchTCcncChpTS 9E+ZF/F67YwpuIpgraWcoXuZxZKy13wfsJDhMfWk/nrEqicQ4BJN4M/8AzP+fd9sda3li" node1 (config) # ssh client global known-host "10.0.1.2 ssh-rsa AAAAB3NAfgbzY ulDSIxOKZTh2VBnKsy0qRWrCps64Itlh6iRlr7JxazaC1yc2EAAAADAQABAAABAQCzd5JwKtk5BjH Le/jxkF0JzWcXOTw9l0bz2SctkQrihkqg/zXqrmxtE6Z2f2oxUobcax+eqS6QMp5nnbPTDLJTbHCN njkawdDC6IhLk0BdncChpTS9E+ZF/F67YwpuIpgraWrchTCwfG+jAtTAGsygD0VVrchTCcncChpTS 9E+ZF/F67YwpuIpgraWcoXuZxZKy13wfsJDhMfWk/nrEqicQ4BJN4M/8AzP+fd9sda3li" hostname (config) # show ssh client SSH client Strict Hostkey Checking: ask Minimum protocol version: 2 Cipher list: compatible Minimum key length: 1024 bits ``` ```plaintext SSH Global Known Hosts:    Entry 1:          Host:              10.0.0.2          Finger Print:      54:fa:10:2a:f4:c2:cf:3a:46:b1:a4:ed:72:78:b8:22          Key Length (bits): 2048   Entry 2:          Host:              10.0.1.2          Finger Print:      54:fa:10:2a:f4:c2:cf:3a:46:b1:a4:ed:72:78:b8:22          Key Length (bits): 2048 .... node1 (config) # write memory node1 (config) # reload ```