--- title: "Importing an SSL interception CA certificate using the CLI" slug: "importing-an-ssl-interception-ca-certificate-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:33Z published: 2026-09-12T20:42:33Z canonical: "docs.trellix.com/importing-an-ssl-interception-ca-certificate-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Importing an SSL interception CA certificate using the CLI Use the commands in this section to import the trusted and untrusted SSL CA certificates. > [!WARNING] > Important > > You must import the trusted and untrusted SSL interception CA certificates separately. **To import an SSL interception CA certificate:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Import the certificate. ``` hostname (config) # crypto certificate name public-cert pem "" [comment" private-key pem"" ``` where: - `<certificateName>` can be a unique name of your choice. For example, you can name the trusted SSL interception CA certificate ssl-proxy-trusted. You can name the untrusted SSL certificate ssl-proxy-untrusted. - `<pemString>` is the private key PEM string. For details about how to format the PEM string, see [Configuring SSL interception CA certificates](/network-and-platform/docs/configuring-ssl-interception-ca-certificates). (Optional) Import the private key with secure echo, so asterisks are displayed instead of the PEM string characters. ``` hostname (config) # crypto certificate name prompt-private-key ``` 4. Verify that the SSL interception CA certificate has been imported. ``` hostname (config) # show crypto certificate name ``` 5. Save your changes. ``` hostname (config) # write memory ```