--- title: "Inline Deployment" slug: "inline-deployment-1" tags: ["Network Security (NX)", "Hardware"] updated: 2026-10-19T19:22:24Z published: 2026-10-19T19:22:24Z canonical: "docs.trellix.com/inline-deployment-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Inline Deployment For information about changing the default submission interface, see the chapter “Performing the Initial Configuration” in the *Threat Management Platform Deployment Guide* for your software release. The diagram below illustrates the deployment of an NX appliance installed between the LAN and the firewall in a typical network topology. ![NX9450_10450_Inline_Deployment.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-956940a0-adac-0422-0536-18423510c536(1).png?sv=2026-02-06&spr=https&st=2026-11-20T20%3A03%3A47Z&se=2026-11-20T21%3A03%3A47Z&sr=c&sp=r&sig=n9zRjtxrs%2BbgK5sHcmwNBm4GjAT77YhxZ56KzLcnF3E%3D) #### Prerequisites Before connecting the NX 8600 appliance to your network: - Make sure that the connecting routers or switches do not provide data output greater than 10 Gbps for both RJ45 and SFP+ ports. - Determine which ports on your routers or switches provide ingress and egress data #### Cabling Connect the appropriate cables to the NX 8600 appliance’s ports as follows: - ether1: Connect one end of the cable to the NX 8600 appliance’s ether1 port, and connect the other end to your LAN-facing switch. This will enable you to access the appliance’s Web UI. - pether3: Connect one end of the cable to the NX 8600 appliance’s pether3 port, and connect the other end to your LAN-facing switch. - pether4: Connect one end of the cable to the NX 8600 appliance’s pether4 port, and connect the other end to the Internet-facing switch. You can monitor another network segment by connecting a LAN-facing switch and an Internet-facing switch to pether5–6. Alternatively, pether5—16 can be used instead. :