--- title: "Inline deployment walkthrough" slug: "inline-deployment-walkthrough-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:25Z published: 2026-11-19T12:27:25Z canonical: "docs.trellix.com/inline-deployment-walkthrough-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Inline deployment walkthrough In-line mode enables you to run the Sensor in a *protection/prevention* mode, where packet inspection is performed in real time, and intrusive packets can be dealt with immediately; you can actively drop malicious packets because the Sensor is physically in the path of all network traffic. This enables you to actually prevent an attack from reaching its target. 1. Determine the optimal high availability strategy for the Sensor. This indicates how you would like the Sensor to behave when it fails (that is, fail-open, fail-closed, or support a failover/high-availability configuration). 2. Physically install the Sensor on your network, and connect the Sensor cables for the deployment mode of your choice. For example, connect one Sensor standalone (to fail-open, if applicable, or configure two Sensors as part of a HA pair). 3. Configure the Sensor monitoring ports. 4. Configure one or more policies for the inline ports. 5. Understand how blocking works, and configure blocking. > [!NOTE] > Note > > You must use Manager to configure most aspects of your Sensor(s), including port configuration, pairing two Sensors for failover operation, and configuring and applying policies to detect and drop malicious traffic.