--- title: "Inside the box" slug: "inside-the-box-1" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T07:33:43Z published: 2026-09-17T07:33:43Z canonical: "docs.trellix.com/inside-the-box-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Inside the box Every fail-open kit consists of the same set of components. Although the type of cables and the switch vary from one model to another, the list of items in the kit itself remains the same. The table provides you with a list of items. | Qty | Item | Description | | --- | --- | --- | | 1 | Fail-Open switch | Copper: 1000Base-T switch; connects to the GE ports of all applicable Sensor models directly through the Sensor's built-in Control port Fiber: Connects to the 1-Gigabit or 10-Gigabit ports of all applicable Sensor models directly through the Sensor's built-in Control port | | 1 | 19-inch rack-mount panel for 3 switches | 1RU mounting hardware to mount up to 3 bypass switches in a standard rack | | 1 | 3 m RJ-45 to RJ-11 cable | Connects the Sensor Control port to the fail-open switch | | 4 | Copper: 3 m RJ-45 to RJ-45 cable Fiber: 3 m LC-LC | Connects the fail-open switch to network devices and the Sensor > [!NOTE] > Note > > For a fiber fail-open kit, these cables are either single-mode or multi-mode cables depending on the requirements provided at the time of purchase. |