--- title: "Install a transceiver module" slug: "install-a-transceiver-module-4" tags: ["Hardware"] updated: 2026-09-17T09:54:41Z published: 2026-09-17T09:54:41Z canonical: "docs.trellix.com/install-a-transceiver-module-4" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Install a transceiver module The steps outlined below are applicable for the built-in G0 module only in NS7600 Sensor. 1. Remove the transceiver from its protective packaging. 2. Locate the label on the transceiver and make sure that the alignment groove is down. 3. Grip the sides of the transceiver with your thumb and forefinger and insert it into the module socket. Modules are keyed to prevent incorrect insertion. **Install a transceiver module**![Install a transceiver module](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-74308e84-0009-0ce9-f871-98dfc4170032.jpg?sv=2026-02-06&spr=https&st=2026-11-20T09%3A12%3A13Z&se=2026-11-20T10%3A12%3A13Z&sr=c&sp=r&sig=fQvaExs1VBurcWgNvQpK1fZ84SEQYULuOSnZi34mEyc%3D)