--- title: "Install Guest Portal on the Sensor" slug: "install-guest-portal-on-the-sensor-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:57Z published: 2026-11-19T12:27:57Z canonical: "docs.trellix.com/install-guest-portal-on-the-sensor-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Install Guest Portal on the Sensor Verify that the Guest Portal is installed on the Sensor using the `Status` CLI command. Guest Portal is installed by default. ![GUID-23792BF5-7E94-4C35-9F0A-1081DB95BEA4-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-df5ce6aa-666e-1e7a-d8a6-d21333765350(7).png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A54%3A47Z&se=2026-11-20T12%3A54%3A47Z&sr=c&sp=r&sig=O4iTxoI5sWrl5jA8oeJozbY3eBvzEr7eKRQeEBHRHas%3D) If the Guest Portal is down, follow the steps in this section to install the Guest Portal. 1. Establish communication between the Sensor and Manager. 2. In the Sensor CLI, type `guest-portal install` 3. You must enter the following details for generating the default Guest Portal Certificate: - Common Name (IP Address/Domain Name) - Organization - Organization Unit - City - State - 2 letter Country code 4. Once the certificate is generated, type `guest-portal status`. This command displays all the information related to the Guest Portal. To uninstall the Guest Portal from the Sensor, use the `guest-portal deinstall` command. This command also deletes the default Guest Portal certificate that was generated when you installed the portal. You can also temporarily stop the Guest Portal on the Sensor using the `guest-portal stop` command. To start it again, use the `guest-portal start` command. > [!NOTE] > Note > > Suppose you are trying to install Guest Portal on the Sensor and Sensor-Manager communication goes down. The Guest Portal cannot be hosted in such a scenario. You have to establish Sensor-Manager communication and follow the steps above to get the Guest Portal running. When Sensor-Manager communication is down, you cannot login to the installed Guest Portal.