The new docs.trellix.com features a modernized UI and AI-powered conversational search. Content is currently available in English, with additional languages launching in early November 2026. We hope you enjoy the updated experience.

Press CTRL+K to open search

Install Guest Portal on the Sensor

  • Published on Oct 5, 2026
  • 1 minute(s) read
Prev Next

Verify that the Guest Portal is installed on the Sensor using the Status CLI command. Guest Portal is installed by default.

GUID-23792BF5-7E94-4C35-9F0A-1081DB95BEA4-low.png

If the Guest Portal is down, follow the steps in this section to install the Guest Portal.

  1. Establish communication between the Sensor and Manager.

  2. In the Sensor CLI, type

    guest-portal install

  3. You must enter the following details for generating the default Guest Portal Certificate:

    • Common Name (IP Address/Domain Name)

    • Organization

    • Organization Unit

    • City

    • State

    • 2 letter Country code

  4. Once the certificate is generated, type guest-portal status. This command displays all the information related to the Guest Portal.

    To uninstall the Guest Portal from the Sensor, use the guest-portal deinstall command. This command also deletes the default Guest Portal certificate that was generated when you installed the portal. You can also temporarily stop the Guest Portal on the Sensor using the guest-portal stop command. To start it again, use the guest-portal start command.

    Note

    Suppose you are trying to install Guest Portal on the Sensor and Sensor-Manager communication goes down. The Guest Portal cannot be hosted in such a scenario. You have to establish Sensor-Manager communication and follow the steps above to get the Guest Portal running. When Sensor-Manager communication is down, you cannot login to the installed Guest Portal.

Copyright © 2026 Musarubra US LLC | Privacy | Legal | AI Disclaimer