--- title: "Install or remove rack handles" slug: "install-or-remove-rack-handles" updated: 2026-09-08T19:56:54Z published: 2026-09-08T19:56:54Z canonical: "docs.trellix.com/install-or-remove-rack-handles" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Install or remove rack handles - To install a rack handle, align it with the two holes on the side of the Intelligent Sandbox Appliance and attach the rack handle to the Appliance with two screws as shown. ### Note ATD-3100, ATD-6100, ATD-3200, and ATD-6200 comes with the handles attached out of the box. Figure 9. Installing the rack handle![Installing the rack handle](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-f92d7ae6-bc1d-b52d-c8cd-47f0159056b6(2).png?sv=2026-02-06&spr=https&st=2026-11-22T15%3A34%3A33Z&se=2026-11-22T16%3A34%3A33Z&sr=c&sp=r&sig=AdLpk1MwzGJSHXStqT%2BTQNlwdZ3cgxukFpAuVOkoMjI%3D) - To remove a rack handle, remove the two screws holding the rack handle in place, and remove the rack handle from the server system as shown. Figure 10. Removing the rack handle![Removing the rack handle](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-99b902b5-dcee-1ec8-8614-b4c13fa033c6(2).png?sv=2026-02-06&spr=https&st=2026-11-22T15%3A34%3A33Z&se=2026-11-22T16%3A34%3A33Z&sr=c&sp=r&sig=AdLpk1MwzGJSHXStqT%2BTQNlwdZ3cgxukFpAuVOkoMjI%3D) :