--- title: "Install the active Fail-Open module and chassis" slug: "install-the-active-fail-open-module-and-chassis" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T07:33:43Z published: 2026-09-17T07:33:43Z canonical: "docs.trellix.com/install-the-active-fail-open-module-and-chassis" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Install the active Fail-Open module and chassis **Prerequisites:** - Make sure you have the Active Fail-Open chassis. - Identify the rack in which you plan to install the fail-open chassis. - If you are using a physical Sensor, make sure that you can physically connect the chassis with the monitoring ports. - Insert the Active Fail-Open module into one of the 3 slots available before powering up the chassis. For more information, see the section [Connect the fail-open switch to network devices](/network-and-platform/docs/connect-the-fail-open-module-to-a-sensor) You can install up to three Fail-Open modules in a single chassis. > [!NOTE] > Note > > You can install an active Fail-Open module in the chassis on the fly while the chassis is powered on in the rack. If you insert a new module for the first time in a slot that has been empty since installation, the new module becomes active after a reboot of the chassis. Trellix recommends you to insert the Active Fail-Open module(s) into the slot first before turning on the power. **Steps:** 1. Install the ears of the chassis. ![GUID-CE17197C-005C-4CFF-BC37-19A3B7FCD093-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-286c539a-bd71-420b-93c2-6dcf6ba03203.png?sv=2026-02-06&spr=https&st=2026-11-20T20%3A03%3A49Z&se=2026-11-20T21%3A03%3A49Z&sr=c&sp=r&sig=LlaKtXiA5c4UXfzAdEpPEXHG9%2Bp2BjGooO1uNOSflTY%3D) 2. Install the rails. ![GUID-D1BB27FB-4050-46A5-A9C6-AEEC85D9896F-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-da74247b-0154-b9cb-3092-ab0886af70f2.png?sv=2026-02-06&spr=https&st=2026-11-20T20%3A03%3A49Z&se=2026-11-20T21%3A03%3A49Z&sr=c&sp=r&sig=LlaKtXiA5c4UXfzAdEpPEXHG9%2Bp2BjGooO1uNOSflTY%3D) 3. Mount the rails to the chassis. The rails consist of the following: - An Inner Rail that is connected to the Active Fail-Open chassis. - An Outer Rail that is mounted on a 4-post rack. ![GUID-D6B97823-80D3-417B-B0B6-132B7CE93E63-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-6901cc87-7d90-84ec-da3d-7a4b1a832488.png?sv=2026-02-06&spr=https&st=2026-11-20T20%3A03%3A49Z&se=2026-11-20T21%3A03%3A49Z&sr=c&sp=r&sig=LlaKtXiA5c4UXfzAdEpPEXHG9%2Bp2BjGooO1uNOSflTY%3D) 1. Align the Inner Rail slots to chassis arms as depicted below. 2. Push the Inner Rails toward the back of the chassis to lock it in. ![GUID-75B73C20-9A0F-4610-B50C-7D180D9E3D81-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-7127a785-5bf1-261e-6837-9a6a27ab9602.png?sv=2026-02-06&spr=https&st=2026-11-20T20%3A03%3A49Z&se=2026-11-20T21%3A03%3A49Z&sr=c&sp=r&sig=LlaKtXiA5c4UXfzAdEpPEXHG9%2Bp2BjGooO1uNOSflTY%3D) 3. Use screws provided with the rails to secure the Inner Rails onto the chassis. ![GUID-E1969057-B36F-4259-AF68-81AA3B1913C3-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-bb145c1b-8006-d299-f107-2c1e553f8498.png?sv=2026-02-06&spr=https&st=2026-11-20T20%3A03%3A49Z&se=2026-11-20T21%3A03%3A49Z&sr=c&sp=r&sig=LlaKtXiA5c4UXfzAdEpPEXHG9%2Bp2BjGooO1uNOSflTY%3D) 4. Assemble the Outer Rails onto the 4-post rack. ![GUID-E3A74D2E-9089-4F5B-96DD-CDF5EF26949E-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-c5b1c77f-8df6-c134-d836-bbb0e241fc80.png?sv=2026-02-06&spr=https&st=2026-11-20T20%3A03%3A49Z&se=2026-11-20T21%3A03%3A49Z&sr=c&sp=r&sig=LlaKtXiA5c4UXfzAdEpPEXHG9%2Bp2BjGooO1uNOSflTY%3D) 5. Extend the Outer Rails arms. ![GUID-50DD8A1E-C31E-4927-B50C-44016F03459E-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-f0214ac0-25da-162b-fe51-663a7207c76b.png?sv=2026-02-06&spr=https&st=2026-11-20T20%3A03%3A49Z&se=2026-11-20T21%3A03%3A49Z&sr=c&sp=r&sig=LlaKtXiA5c4UXfzAdEpPEXHG9%2Bp2BjGooO1uNOSflTY%3D) 6. Attach the chassis to the Outer Rails and push the chassis into the rack by pressing the clip down. ![GUID-885448B6-99BB-451C-95A0-380A35F7097A-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-285c20c3-6158-8835-3bdf-317c9c637dbe.png?sv=2026-02-06&spr=https&st=2026-11-20T20%3A03%3A49Z&se=2026-11-20T21%3A03%3A49Z&sr=c&sp=r&sig=LlaKtXiA5c4UXfzAdEpPEXHG9%2Bp2BjGooO1uNOSflTY%3D) 7. Secure the chassis by inserting screws through holes in the ears of the chassis. ![GUID-FA65CC85-9F8D-4FA7-A45C-C20012D31015-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-ca76d93a-d402-b48c-d6c1-bcd72850c740.png?sv=2026-02-06&spr=https&st=2026-11-20T20%3A03%3A49Z&se=2026-11-20T21%3A03%3A49Z&sr=c&sp=r&sig=LlaKtXiA5c4UXfzAdEpPEXHG9%2Bp2BjGooO1uNOSflTY%3D) **Result:** The Active Fail-Open module is ready to be connected to a Sensor.