--- title: "Install the fan module" slug: "install-the-fan-module" tags: ["Reference", "IPS 11.1.x"] updated: 2026-10-01T07:58:57Z published: 2026-10-01T07:58:57Z canonical: "docs.trellix.com/install-the-fan-module" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Install the fan module 1. Locate the new fan module. Remove it from its packaging. | \| ![Fan_front.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-03ee2336-23ef-0cda-10ef-3022393e4704.jpg?sv=2026-02-06&spr=https&st=2026-11-20T22%3A06%3A11Z&se=2026-11-20T23%3A06%3A11Z&sr=c&sp=r&sig=kNhhHNQDqimt60Px%2BLxCrXPFHBGzj%2FW5fNpgvVH8cvQ%3D) \| \| --- \| | \| ![Fan_back.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-41123c3b-6825-c228-41b1-9d6428675c4c.jpg?sv=2026-02-06&spr=https&st=2026-11-20T22%3A06%3A11Z&se=2026-11-20T23%3A06%3A11Z&sr=c&sp=r&sig=kNhhHNQDqimt60Px%2BLxCrXPFHBGzj%2FW5fNpgvVH8cvQ%3D) \| \| --- \| | | --- | --- | | ![Fan_front.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-03ee2336-23ef-0cda-10ef-3022393e4704.jpg?sv=2026-02-06&spr=https&st=2026-11-20T22%3A06%3A11Z&se=2026-11-20T23%3A06%3A11Z&sr=c&sp=r&sig=kNhhHNQDqimt60Px%2BLxCrXPFHBGzj%2FW5fNpgvVH8cvQ%3D) | | ![Fan_back.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-41123c3b-6825-c228-41b1-9d6428675c4c.jpg?sv=2026-02-06&spr=https&st=2026-11-20T22%3A06%3A11Z&se=2026-11-20T23%3A06%3A11Z&sr=c&sp=r&sig=kNhhHNQDqimt60Px%2BLxCrXPFHBGzj%2FW5fNpgvVH8cvQ%3D) | 2. Align the fan connector with the chassis connector and carefully lower the new fan in the appropriate slot. 3. Press down to engage the fan connector. ![IMG_6744_edited.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-8f5264c2-4793-307b-559a-217569ece562.jpg?sv=2026-02-06&spr=https&st=2026-11-20T22%3A06%3A11Z&se=2026-11-20T23%3A06%3A11Z&sr=c&sp=r&sig=kNhhHNQDqimt60Px%2BLxCrXPFHBGzj%2FW5fNpgvVH8cvQ%3D) 4. Reinstall the fan panel cover. Secure the fan panel cover using the 3 previously removed screws. ![IMG_6664_Up.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-8d1daff7-ea83-74e1-3f8f-b49a24b36de1.jpg?sv=2026-02-06&spr=https&st=2026-11-20T22%3A06%3A11Z&se=2026-11-20T23%3A06%3A11Z&sr=c&sp=r&sig=kNhhHNQDqimt60Px%2BLxCrXPFHBGzj%2FW5fNpgvVH8cvQ%3D) 5. Test the functionality of the Sensor. 1. Using the Sensor CLI (normal mode), execute the [`status`](/network-and-platform/docs/status-1) command to display Sensor system status, Sensor health, signature set version, trust channel status, alert counts, and so on. The Sensor should be initialized and in good health. 2. For configuration information, such as Sensor model and image version, execute the [`show`](/network-and-platform/docs/show-2) command. > [!NOTE] > Note > > The Manager displays the System Health status in **Dashboard**. Manager status should be **UP**, and Sensor status should be **ACTIVE**.