--- title: "Install the interface module during a fresh installation of the Sensor" slug: "install-the-interface-module-during-a-fresh-installation-of-the-sensor-1" tags: ["Hardware"] updated: 2026-09-17T10:17:59Z published: 2026-09-17T10:17:59Z canonical: "docs.trellix.com/install-the-interface-module-during-a-fresh-installation-of-the-sensor-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Install the interface module during a fresh installation of the Sensor This section provides the steps to install the interface module for a fresh installation of Manager and Sensor. 1. Remove the module from its protective packaging. > [!NOTE] > Note > > It is assumed that the Sensor is yet to be powered on, and trust between the Sensor and the Manager has not been established. 2. Remove the slot filler from the Sensor. 3. Grip the sides of the module with your thumb and forefinger and insert the module into the slot. **Install an interface module**![Install an interface module](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-bf69589a-d03e-ff1e-adff-4e9c0c84db4d.jpg?sv=2026-02-06&spr=https&st=2026-11-20T08%3A50%3A39Z&se=2026-11-20T09%3A50%3A39Z&sr=c&sp=r&sig=LuKWyqlhwUZp3I0hra8KeHE43aU4hgZ2KHzgV%2Fs%2B%2FfA%3D) 4. Drive in the screws fixed on the sides of the module to attach it to the Sensor. 5. Turn on the Sensor. 6. Establish trust between the Sensor and the Manager.