--- title: "Install the interface module on an up and running Sensor" slug: "install-the-interface-module-on-an-up-and-running-sensor-5" tags: ["Hardware"] updated: 2026-09-17T09:54:41Z published: 2026-09-17T09:54:41Z canonical: "docs.trellix.com/install-the-interface-module-on-an-up-and-running-sensor-5" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Install the interface module on an up and running Sensor This section provides the steps to install the interface module on a Sensor which is up and running. 1. Power on the Sensor without inserting the pluggable module(s) into the slot(s). 2. Establish trust between the Sensor and the IPS Manager. 3. Grip the sides of the module with your thumb and forefinger and insert the module into the slot. 4. Wait for 5 minutes. 5. Reboot the Sensor from the CLI, or from the Manager.