--- title: "Install the interface modules" slug: "install-the-interface-modules-1" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T11:19:16Z published: 2026-09-17T11:19:16Z canonical: "docs.trellix.com/install-the-interface-modules-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Install the interface modules You can purchase the following interface modules and insert them into the relevant slots on your NS-series Sensor. - 8-port SFP/SFP+ 1/10 Gigabit interface module - 4-port 1/10 Gigabit fiber interface module with built-in fail open - 6-port RJ45 10/100/1000 Mbps Ethernet interface module with built-in fail open - 4-port RJ45 100/1000/10000 Mbps Ethernet interface module with built-in fail open 1. Remove the module from its protective packaging. 2. Grip the sides of the module with your thumb and fore-finger and insert the module into the slot. ![GUID-23786C9D-2B46-44AE-A6BA-7DC69924464E-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-5f26dfba-a7d8-aa42-a492-fbf28deefabf.png?sv=2026-02-06&spr=https&st=2026-11-20T09%3A48%3A08Z&se=2026-11-20T10%3A48%3A08Z&sr=c&sp=r&sig=xFN7SVIzxJSrKMaxlwWKUgLj7k0Ydy0PR5SWJGU09Fw%3D)![GUID-7FE93A0F-D95E-43C1-BCFE-7AFCFAC93B59-low.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-9d0899b5-1ad0-996c-6203-fedc8ecfb2be(1).jpg?sv=2026-02-06&spr=https&st=2026-11-20T09%3A48%3A08Z&se=2026-11-20T10%3A48%3A08Z&sr=c&sp=r&sig=xFN7SVIzxJSrKMaxlwWKUgLj7k0Ydy0PR5SWJGU09Fw%3D) 3. Drive in the screws fixed on the sides of the module to attach it to the Sensor.