--- title: "Install the interface modules" slug: "install-the-interface-modules" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T11:10:21Z published: 2026-09-17T11:10:21Z canonical: "docs.trellix.com/install-the-interface-modules" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Install the interface modules You can purchase the following interface modules and insert them into the relevant slots on your NS-series Sensor. - 2-port QSFP28 100 Gigabit interface module - 2-port 100/40 Gigabit SR MTP/MPO module with passive fail-open - 4-port QSFP+ 40 Gigabit interface module - 8-port SFP/SFP+ 1/10 Gigabit interface module - 4-port 1/10 Gigabit LC Fiber module with passive fail-open - 6-port RJ-45 10/100/1000 Mbps Ethernet interface module - 4-port RJ-45 100/1000/10000 Mbps Ethernet Monitoring ports Perform the following steps to install any interface module: 1. Remove the module from its protective packaging. 2. Grip the sides of the module with your thumb and fore-finger and insert the module into the slot. | \| ![GUID-10BA1B6E-76B7-4EE2-86D5-258A6EBDBA97-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-beca9664-d051-886f-27bd-a134fbdce84a(1).png?sv=2026-02-06&spr=https&st=2026-11-20T09%3A12%3A09Z&se=2026-11-20T10%3A12%3A09Z&sr=c&sp=r&sig=%2FYZDEb36diBcA5IDSxQ6Mm%2BW8bwAJnEPDQB4O14Ywlo%3D) \| \| --- \| | \| ![Inserting_QSFP28.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-3bbc3899-b00a-e573-cb4c-3518f9880d5d.jpg?sv=2026-02-06&spr=https&st=2026-11-20T09%3A12%3A09Z&se=2026-11-20T10%3A12%3A09Z&sr=c&sp=r&sig=%2FYZDEb36diBcA5IDSxQ6Mm%2BW8bwAJnEPDQB4O14Ywlo%3D) \| \| --- \| | | --- | --- | | ![GUID-10BA1B6E-76B7-4EE2-86D5-258A6EBDBA97-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-beca9664-d051-886f-27bd-a134fbdce84a(1).png?sv=2026-02-06&spr=https&st=2026-11-20T09%3A12%3A09Z&se=2026-11-20T10%3A12%3A09Z&sr=c&sp=r&sig=%2FYZDEb36diBcA5IDSxQ6Mm%2BW8bwAJnEPDQB4O14Ywlo%3D) | | ![Inserting_QSFP28.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-3bbc3899-b00a-e573-cb4c-3518f9880d5d.jpg?sv=2026-02-06&spr=https&st=2026-11-20T09%3A12%3A09Z&se=2026-11-20T10%3A12%3A09Z&sr=c&sp=r&sig=%2FYZDEb36diBcA5IDSxQ6Mm%2BW8bwAJnEPDQB4O14Ywlo%3D) | 3. Drive in the screws fixed on the sides of the module to attach it to the Sensor.