--- title: "Install Virtual Intelligent Sandbox on Hyper-V manually" slug: "install-virtual-intelligent-sandbox-on-hyper-v-manually" updated: 2026-09-08T19:56:44Z published: 2026-09-08T19:56:44Z canonical: "docs.trellix.com/install-virtual-intelligent-sandbox-on-hyper-v-manually" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Install Virtual Intelligent Sandbox on Hyper-V manually Place an order, download the software, then deploy it on Hyper-V server. - Ensure that you have enabled Hyper-V (including **Hyper-V Management Tools** and **Hyper-V Platform**) from Control Panel → Programs and Features → Turn Windows features on or off → Hyper-V. - Unzip the Virtual Intelligent Sandbox package that you purchased from . The package includes `hvATD.vhdx`. This is the disk image of Virtual Intelligent Sandbox. - Disable Hyper-V compatibility mode on your Hyper-V server. ### Important Virtual Intelligent Sandbox does not support Dynamic MAC address. Make sure that you set a static MAC address for your Virtual Intelligent Sandbox. 1. Open Hyper-V Manager, then from the **Actions** pane, select New → Virtual Machine.... 2. Type a name for your virtual machine, then click **Next**. You can also choose to store your virtual machine at an alternate location. 3. In the Specify Generation section, choose **Generation 1**. 4. In the Assign Memory section, set 48 GB. 5. In the Configure Networking section, choose a virtual switch. 6. In the Connect Virtual Hard Disk section, select **Use an existing virtual hard disk**. 7. Click **Browse**, then select **hvATD.vhdx**, and then click **Finish**. ### Note If you plan to deploy multiple instances of Virtual Intelligent Sandbox, make a copy of `hvATD.vhdx`. 8. Right click on the VM, then select Settings → Memory → Processor, then set the processor core to **16**. 9. Open PowerShell. Enable nested virtualization using the following command: ``` Set-VMProcessor –VMName -ExposeVirtualizationExtensions $true ``` In `<Target VM's name>`, enter the name of the VM that you created. 10. Set Static IP address and Gateway to the VM using Intelligent Sandbox console. :