--- title: "Installing a virtual NDR Console on Hyper-V" slug: "installing-a-virtual-ndr-console-on-hyper-v" tags: ["NDRC 4.x", "Network Security", "Customer", "Install and Get Started"] updated: 2026-11-13T13:43:51Z published: 2026-11-13T13:43:51Z canonical: "docs.trellix.com/installing-a-virtual-ndr-console-on-hyper-v" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Installing a virtual NDR Console on Hyper-V This section describes how to install a virtual NDR Console on Microsoft Hyper-V running on either Windows 2019, 2022 or 2025 Servers. > [!NOTE] > Note > > Make sure you have met the Hyper-V installation requirements before you start the virtual NDR Console installation Microsoft on Hyper-V. For detailed information, see the [Hyper-V prerequisites](/network-and-platform/docs/hyper-v-prerequisites). To install a virtual NDR Console on Hyper-V: 1. Create a virtual machine that meets the requirements listed in [Hyper-V prerequisites](/network-and-platform/docs/hyper-v-prerequisites). 2. Copy the NDR `.iso` image to the Windows Server where Hyper-V is running. 3. Open **Hyper-V Manager** from the **Start** menu. 4. Right-click your host machine and select **New > Virtual Machine**. 5. Follow the wizard. 1. Enter a name and location for the VM, click **Next**. 2. Choose a generation for this virtual machine - **generation 1**, click **Next**. 3. Configure the virtual machine memory (64 GB) and then click **Next**. 4. Select the virtual machine management interface to access NDR Console, click **Next**. 6. Configure the following paramaters to connect to the virtual machine hard disk for the NDR Console OS installation. 1. Type the disk name. 2. Select the location where you want the NDR Console OS to be installed. 3. Configure the NDR Console OS disk size -**120 GB**. 4. Click **Next**. 7. Choose the **Install an operating system from a bootable CD/DVD-ROM** option. 8. Choose the **Image file (.iso)** option. 9. Click **Browse** and select the NDR Console iso image that you downloaded and then click **Next**. 10. Review the summary and then click **Finish**. 11. From the list of virtual machines, select NDR Console VM, and then select **Settings**. > [!NOTE] > Note > > In the Settings window, select BIOS in the left pane and verify the boot sequence order. Ensure that IDE is listed as the first boot option, followed by CD as the second option. If IDE is not listed first, use the Move Up or Move Down buttons to move IDE above CD. 12. Enter the required number of virtual processors in the **Number of virtual processors** field. > [!TIP] > Tip > > The maximum supported number of virtual processors is 16. 13. To add an additional hard disk for data storage: 1. Click **IDE Controller**, select **Hard Drive >Add**. 2. Click **New > VHDX** and then click **Next**. 3. Choose **Fixed size** and then click **Next**. 4. Specify the hard disk file name and location, click **Next**. 5. Specify the hard disk size as 200 GB and then click **Next**. 6. Click **Finish**. 7. Select **Physical Hard Disk**, click **Next**. 8. Click **Finish**. 14. (Optional) If NDR Console is used as Master/Slave node, add the following additional interface details. 1. Click **Add Hardware** and select **Network Adapter**. 2. Select the virtual switch and then click **Apply**. 15. Start the VM. 16. From the boot menu, select the **Install IA (console)** option, and then press **Enter**. 17. When prompted to choose the destination disk, type `2` to select the `sda` virtual disk, and then press **Enter**. 18. At the confirmation prompt, type `yes`, and then press **Enter** to format the disk and start the installation. 19. Perform the initial configuration as described in [Performing the initial NDR Console configuration](/network-and-platform/docs/performing-the-initial-ndr-console-configuration).