--- title: "Installing a virtual Network Security appliance using Microsoft Hyper-V Manager" slug: "installing-a-virtual-network-security-appliance-using-microsoft-hyper-v-manager" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-10-01T09:45:15Z published: 2026-10-01T09:45:15Z canonical: "docs.trellix.com/installing-a-virtual-network-security-appliance-using-microsoft-hyper-v-manager" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Installing a virtual Network Security appliance using Microsoft Hyper-V Manager This section describes how to install a virtual Network Security appliance using Microsoft Hyper-V Manager. ### Important This procedure uses Microsoft Hyper-V version 10.0.14393.0. The navigation instructions and user interface may vary based on your version of this product. ### Note This procedure covers the required settings for a Trellix virtual appliance. You can accept the default values for the other settings, or specify values that are appropriate for your setup. To install a virtual appliance using Microsoft's Hyper-V Manager: 1. Download the Network Security Hyper-V deployment` .zip `file from the Trellix DTI network to a Hyper-V server and extract the files within it. The` .zip `file name depends on the model. For example, ` image-wmps-fireeyenx4500v`. After the files are extracted, verify that the` image-wmps-fireeyenx<model>v-hyperv `folder contains the` Virtual Hard Disks `and` Virtual Machines `folders. If it does not, contact Trellix Technical Support. The folder also contains a readme file with brief installation information. 2. In Hyper-V Manager, select **Action** > **Import Virtual Machine**. The Import Virtual Machine wizard opens. ![DG_HyperVMenu.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-2a1a9c4b-ed44-6603-306a-09c3894362bb.png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A04%3A25Z&se=2026-11-20T11%3A04%3A25Z&sr=c&sp=r&sig=SiUaSbbiW9Q%2FWWv11thFwI0pxIpuDc0W6FmiEU6UIGM%3D) 3. Complete the wizard screens as described in the following table. | Screen | Action | | --- | --- | | Before You Begin | Click **Next**. | | Locate Folder | Browse to and select the folder to which you extracted the `.zip` file in the first step. You only need to select the top-level folder. Click **Next**. | | Select Virtual Machine | Select the virtual machine model associated with the` .zip `file. Click **Next**. | | Choose Import Type | Select **Copy the virtual machine (create a new unique ID)**. Click **Next**. | | Choose Folders for Virtual Machine Files | Click **Next** to accept the default settings. | | Choose Folders to Store Virtual Hard Disks | Select the top-level folder into which you extracted the` .zip `file. This folder includes the **Virtual Hard Disks** folder. Click **Next**. | | Connect Network | Select a virtual switch to use for the management port (ether1) on the virtual appliance. Click **Next**. | | Connect Network | Select a virtual switch to use for the submission interface (ether2) on the virtual appliance. Click **Next**. | | Connect Network | Select a virtual switch to use for the first monitoring interface in the first port pair (pether3). Click **Next**. | | Connect Network | (*For inline mode*): Select a virtual switch to use for the other monitoring interface in the first port pair (pether 4). Click **Next**. | | Completing Import Wizard | Verify the information. If you are satisfied, click **Finish** to import the virtual appliance. If you need to make changes, click **Previous**. | 4. *(Optional)* Right-click the virtual appliance in the **Virtual Machines** section of Hyper-V Manager, select **Rename**, and enter a new name for the virtual appliance. 5. Right-click the virtual appliance, select **Settings**, and then verify that the virtual appliance settings meet the specifications listed in [Hyper-V specifications](/network-and-platform/docs/hyper-v-specifications). 6. Add additional network adapters as needed: 1. In Hyper-V Manager, select the virtual machine and then click **Settings**. 2. On the Settings page, click **Add Hardware**. 3. Select **Network Adapter**. 4. Select the virtual switch to use for the network adapter. 5. Click **OK**. 7. The virtual appliance is turned off by default after it is imported. To turn it on, right-click the virtual appliance and select **Start**. 8. To open the virtual appliance console, right-click the virtual appliance and select **Connect**. :