--- title: "Installing guest images from a USB device using the CLI" slug: "installing-guest-images-from-a-usb-device-using-the-cli-6" tags: ["Malware Analysis (AX)", "AX 10.x", "Product Usage"] updated: 2026-10-01T20:47:36Z published: 2026-10-01T20:47:36Z canonical: "docs.trellix.com/installing-guest-images-from-a-usb-device-using-the-cli-6" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Installing guest images from a USB device using the CLI Use the commands in this topic to install guest images from a USB device onto the appliance. By default, you can access only the contents locally in the `fireeye` directory for the first partition from a specified URL. ### Note The Central Management System appliance does not host guest images when it is operating in "inline" mode. Prerequisites - Admin access - Enable auto-mounting on the USB device to the attached appliance. For details about how to enable auto-mounting, see [Enabling or disabling auto-mounting on a USB device using the CLI](/network-and-platform/docs/enabling-or-disabling-auto-mounting-on-a-usb-device-using-the-cli-6) . - Configure HTTP access. For details, see [Configuring HTTP access to install software updates using the CLI](/network-and-platform/docs/configuring-http-access-to-install-software-updates-using-the-cli-5). - Complete the steps in the following order to set up the files correctly to install guest images from a USB device: 1. Download the guest images tar file from the Trellix network. 2. Extract the contents on the USB device. 3. Remove the version numbers. Copy the following file names: - `server-manifest.VERSION `to` server-manifest` - `server-manifest.VERSION.md5 `to` server-manifest.md5` - `server-manifest.VERSION.v2 `to` server-manifest.v2` - `server-manifest.VERSION.v2.md5 `to` server-manifest.v2.md5` To download guest images from a USB device: 1. Download guest images using the specified URL as the location to install the guest images: ```plaintext hostname (config) # guest-images download url ``` where` URL` is the location that you specified as the top-level directory for the installation. Wait for the appliance to fully download the guest images before beginning any installations. 2. Verify the download progress: ```plaintext hostname (config) # show guest-images download ``` 3. After the download is complete, install the guest images: ```plaintext hostname (config) # guest-images install ``` 4. Verify that guest images are properly installed: ```plaintext hostname (config) # show guest-images ```