--- title: "Installing KVM on a Linux Machine" slug: "installing-kvm-on-a-linux-machine-1" tags: ["Product Usage", "vIPS 11.1x", "vIPS"] updated: 2026-09-11T20:53:15Z published: 2026-09-11T20:53:15Z canonical: "docs.trellix.com/installing-kvm-on-a-linux-machine-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Installing KVM on a Linux Machine ****Steps:**** 1. Check if the Linux machine supports virtualization. To check, launch a command line terminal and execute the command `egrep '(vmx|svm)' /proc/cpuinfo`. - If virtualization is disabled, you can enable it in the server BIOS. - If the machine does not support virtualization, then you cannot install KVM. 2. Install QEMU, libvirt, and their supporting utilities by issuing the command `yum install -y qemu-kvm qemu-img virt-manager libvirt libvirt-python libvirt-client virt-install virt-viewer bridge-utils dejavu-lgc-sans-fonts`. 3. In order to start using libvirt utilities such as virt-manager, you will first need to enable and start libvirt. 1. To enable libvirt, execute the command `systemctl enable libvirtd`. 2. Once you enable the application, start it by issuing the command `systemctl start libvirtd`. 3. To check if the application has successfully started, execute the command `systemctl status libvirtd`. 4. To check if KVM is successfully installed on the system, execute the command `lsmod | grep -i kvm`. 5. Verify that the QEMU hypervisor is running with the latest version using the command `virsh -c qemu:///system version --daemon`. You should see output similar to this: `Compiled against library: libvirt 4.5.0` ` Using library: libvirt 4.5.0` ` Using API: QEMU 4.5.0` ` Running hypervisor: QEMU 2.12.0` ` Running against daemon: 4.5.0`