Prerequisites:
Copy the Linux-based Manager bootup files to a USB drive from a local folder or a shared location.
Note
For a bootable image of Linux-based Central Manager/Manager, Trellix recommends you to contact technical support at https://support.trellix.com/s/.
Complete the steps below to install Manager Appliance (Linux) using a bootable image:
Steps:
Log in on to the Manager Appliance (Linux) using a console client.
Insert the USB drive in to the appliance.
Execute
rebootcommand in the Manager Appliance console.While the appliance is rebooting, press the F6 key on the keyboard. The Boot Manager appears.
Select the USB drive name that you have inserted to the appliance.

Note
For the installation in the figure above, the name of the USB drive is SanDisk.
Press Enter. Boot up process starts.
Note
You do not have to provide any inputs while the appliance is booting up.
The Manager installation and boot up process will take around 45-60 minutes.
Once the Linux-based Manager is loaded and files copied, the message appears to Remove the USB media.
Remove the USB drive.
The appliance reboots once the USB drive has been removed. On reboot, hardening scripts are executed and the Manager is installed.
You can configure the Manager with IP address, gateway address, netmask address, and DNS server address. For more information on Configuring the Manager Appliance, see Configuring the Manager Appliance.