--- title: "Installing Manager Appliance (Linux) using a bootable image" slug: "installing-manager-appliance-linux-using-a-bootable-image" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-11-19T12:43:21Z published: 2026-11-19T12:43:21Z canonical: "docs.trellix.com/installing-manager-appliance-linux-using-a-bootable-image" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Installing Manager Appliance (Linux) using a bootable image **Prerequisites:** Copy the Linux-based Manager bootup files to a **USB drive** from a local folder or a shared location. > [!NOTE] > Note > > For a bootable image of Linux-based Central Manager/Manager, Trellix recommends you to contact technical support at [https://support.trellix.com/s/](https://support.trellix.com/s/). Complete the steps below to install Manager Appliance (Linux) using a bootable image: **Steps:** 1. Log in on to the Manager Appliance (Linux) using a console client. 2. Insert the **USB drive** in to the appliance. 3. Execute `reboot` command in the Manager Appliance console. 4. While the appliance is rebooting, press the **F6** key on the keyboard. The **Boot Manager** appears. 5. Select the **USB drive** name that you have inserted to the appliance. ![GUID-681807EB-F47F-46CA-92A7-01A90B3123FB-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-2751776a-5253-886b-5d8e-ae77fcc90632.png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A08%3A32Z&se=2026-11-20T12%3A08%3A32Z&sr=c&sp=r&sig=qvvQ4Ze%2Fnl9qE9E4HgYJTpxIR5kP%2ByYpIeabM03h%2FU4%3D) > [!NOTE] > Note > > For the installation in the figure above, the name of the **USB drive** is SanDisk. 6. Press **Enter**. Boot up process starts. > [!NOTE] > Note > > - You do not have to provide any inputs while the appliance is booting up. > - The Manager installation and boot up process will take around 45-60 minutes. 7. Once the Linux-based Manager is loaded and files copied, the message appears to **Remove the USB media**. 8. Remove the USB drive. The appliance reboots once the USB drive has been removed. On reboot, hardening scripts are executed and the Manager is installed. 9. You can configure the Manager with IP address, gateway address, netmask address, and DNS server address. For more information on Configuring the Manager Appliance, see [Configuring the Manager Appliance](/network-and-platform/docs/configure-the-manager-appliance-3).